SOLAIR 3100尘埃粒子计数器授权代理
SOLAIR 3100
Portable Particle Counter
Number 1 in Versatility
The SOLAIR 3100 is the most versatile particle counter on the market today.
Whether you're certifying your cleanroom to ISO standards, performing routine testing, counting particles in your compressed gas lines, scanning your HEPA filters for leaks, challenge testing your HEPA filters or measuring environmental parameters such as TRH, DP, or AV, the SOLAIR 3100 portable particle counter is the right instrument to get the job done.
Cleanroom Certification
Whether you are certifying to current ISO 14644 standards, EU GMP Annex 1 or Federal Standards 209E, the SOLAIR 3100 has you covered with its certification report wizard.
Routine Testing
Routine testing is a breeze with the intuitive interface, zoom screen and on board sample recipes.
Troubleshooting
With beep and sample modes the SOLAIR 3100 will simplify the identification of particle sources within your clean room.
Compressed Gas Testing
The SOLAIR 3100 can be used to test for particle counts in compressed air by utilizing a high pressure diffuser or high pressure. Particles can be tested down to 0.3 micron.
HEPA Filter Scanning
The scanning of HEPA filters is a critical step to ensure the integrity of the HEPA filter and overall cleanliness of the clean room. The ScanAir attachment from Lighthouse makes filter scanning an easier operation.
HEPA Filter Challenge Testing
Monitoring of other environmental parameters such as Temp, Humidity, Differential Pressure or Air Velocity.
Other Environmental Sampling
The SOLAIR 3100 can record data from up to 4 environmental sensors that plug into and are powered by the SOLAIR 3100. Data is recorded into the 3,000 record data buffer and can be downloaded along with the particle count data to your computer of via USB key.
Ease of Use
Spend less time configuring your particle counter and more time counting particles. The SOLAIR 3100 features one of the industry’s best and easy to use touch screen interface (UI). With ICON-driven menus, concise layout and enhanced responsiveness, sample configuration is a breeze.
The intuitive interface reduces learning uptime for new users and simplifies the writing of SOP’s for operation.
For clean room certification the SOLAIR 3100 has an integrated report wizard that makes cleanroom certification a breeze. once the basic sample parameters are input, the wizard will prompt the end user to move to the next sample location which helps to ensure no sample locations are missed.
The configurable recipe database can store up to 50 recipes for sampling and reports. These recipes reduce operator configuration errors as well as setup time.
Lighter is better and the SOLAIR 3100 particle counter is one of the lightest particle counters on the market at only 12 lbs. without battery and 13.4 with a battery.
The SOLAIR 3100 can be powered via onboard battery or plugged directly into a power outlet for extended use. With the fastest battery recharge time of any portable on the market the SOLAIR 3100 offers unrivaled uptime.
Data from the SOLAIR 3100 can be downloaded directly to a standalone software package or a real time monitoring system from Lighthouse.
Flexible communications with these instruments is made possible by the integrated Ethernet, RS-485, USB and USB flash drive interfaces.
Reliability
The SOLAIR 3100 incorporates our extreme life laser diode technology sensor to produce the industry’s longest laser diode life of 20+ year MTTF (based on continuous 24/7 operation).
The vacuum system within the SOLAIR 3100 was designed with closed loop feedback to ensure accurate sample volumes. The vacuum pump was designed and built by Lighthouse to ensure long term reliability.
The SOLAIR 3100's are designed, manufactured and calibrated to ISO 21501-4 to ensure particle-counting accuracy.
The SOLAIR 3100 can store up to 3,000 records of particle count data from up to 8 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports. All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or a Building Automation System. Secure data transfer (per 21 CFR Part 11) to a USB flash drive can be accomplished by using the Lighthouse secure data transfer feature and LMS Express software.
Key Features:
1.0 CFM (28.3 LPM) flow rateUp to 8 particle sizesNumber 1 in class for versatilityIndustry's Best User InterfaceISO 21501-4 CompliantOne of the lightest portables on the market20-year MTTF laser lifespanStainless steel construction21 CFR Part 11 compliant secure data transfer via USB flash driveReport wizard for cleanroom pass/fail reports: FS-209E, ISO 14644-1 (2015 version) and EU GMP Annex 1Multiple communication interfaces; USB, RS-485, Ethernet and USB flash driv.5.7-inch color TFT touch screen display3000 record data storage memory50-record configurable recipe databaseMultiple-language support: English, French, German, Italian, Spanish, Chinese, Russian, Japanese, Korean
