返回主站|会员中心|保存桌面|手机浏览
普通会员

东莞市广联工业设备有限公司

销售:工业自动化器材及设备、气动元件、液压器、液压元件、仪器仪表、电子元件。...

 
新闻中心
  • 暂无新闻
产品分类
  • 暂无分类
站内搜索
 
荣誉资质
  • 暂未上传
友情链接
  • 暂无链接
首页 > 供应产品 > 美国MOOG直动式伺服阀760系列经销直销
美国MOOG直动式伺服阀760系列经销直销
浏览: 761
单价: 面议
最小起订量:
供货总量:
发货期限: 自买家付款之日起 天内发货
有效期至: 长期有效
最后更新: 2022-09-23 15:22
 
详细信息

MOOG穆格流量控制阀#穆格760系列直动式伺服阀#MOOG一级经销商

The 760 Series flow control  servovalves are throttle valves  for 3-, and preferably 4-way  applications.They are a high  performance, two-stage design  that covers the range of rated  flows from 1 to 15 gpm at  1000 psi valve drop.The   output stage is a closed center,  four-way, sliding spool.The pilot  stage is a symmetrical doublenozzle and flapper, driven by a  double air gap, dry torque  motor. Mechanical feedback of  spool position is provided by a cantilever spring.The valve  design is simple and rugged for  dependable, long life operation.  

These valves are suitable for  electrohydraulic position,  speed, pressure or force control systems with high dynamic  response requirements.  

Principle of operation  

An electrical command signal  (flow rate set point) is applied  to the torque motor coils and  creates a magnetic force which  acts on the ends of the pilot  stage armature.This causes a deflection of armature/flapper  assembly within the flexure  tube. Deflection of the flapper  restricts fluid flow through one  nozzle which is carried through  to one spool end, displacing  the spool.

Movement of the spool opens  the supply pressure port (P) to  one control port while simultaneously opening the tank port  (T) to the other control port.  The spool motion also applies  a force to the cantilever spring,  creating a restoring torque on  the armature/flapper assembly

once the restoring torque  becomes equal to the torque  from the magnetic forces, the  armature/flapper assembly  moves back to the neutral  position, and the spool is held  open in a state of equilibrium  until the command signal  changes to a new level.

In summary, the spool position  is proportional to the input  current and, with constant  pressure drop across the valve,  flow to the load is proportional  to the spool position.

VALVE FEATURES  

? 2-stage design with dry torque motor  

? Low friction double nozzle pilot stage  

? High spool control forces  ? High dynamics  

? Rugged, long-life design  ? High resolution, low hysteresis

 ? Compley set-up at the factory

 ? Optional fifth port for separate pilot supply

 ? Intrinsically safe or flameproof valve versions are available

MOOG穆格流量控制阀#穆格760系列直动式伺服阀#MOOG一级经销商

MOOG穆格流量控制阀#穆格760系列直动式伺服阀#MOOG一级经销商 

 

2级设计,喷嘴挡板试点阶段和机械反馈提供高动态,高分辨率和低滞后高滑阀驱动力量,坚固耐用的设计可确保长寿命运行紧凑的设计允许应用程序有限的足迹产品规格液压数据额定流量

4至57升/分钟(1到15 gpm)的ΔP70巴(1000磅)

zui大工作压力

210巴(3000磅)

安装模式

ISO 10372-04-04-0-92 | 0.875“端口圈

100%的阶跃响应

3至16毫秒@ 210巴(3000磅)

电子数据电源电压

N / A

额定信号选项

+ / -15,+ / -30,+ / -40,+ / -50,+ / -200毫安(单线圈)

其他选项

工业应用工程为额外的流量,压力和信号选项

 

询价单
Copyright ©2025 版权所有:东莞市广联工业设备有限公司  访问量:1528
技术支持:寻环网   商铺管理入口

销售热线

15216878095

返回顶部